Windows 10 is a useful as well as feature-rich Operating System along with a few issues. And one such persistent problem is the Generic PnP monitor.

The Generic PnP Monitor issue signifies some problem with the hardware is there. However, at times, defective cables can be responsible for causing this error. Often, the issue occurs right after upgrading the Operating System. This points out that the monitor driver needs troubleshooting.

So, here, we have listed 6 use fixes for the Generic PnP monitor issue. If you are also facing the same, try the following fixes one by one.

Method 1: Reconnecting the Monitor

PnP is the acronym of Plug and Play. So, some issues with connectivity can definitely be the culprit behind this issue. To resolve it, carry on with these steps –

• First, you need to turn the PC off to begin the troubleshooting
• Then, disconnect the wires and cables that are attached to the monitor
• Once you are done disconnecting all the cables, wait for 5 to 10 minutes and let the PC cool down
• After that, plug all the cables back in as they were previously

When you are done, turn on the computer and check if the Generic PnP monitor issue is still there or not.

Method 2: Go for a Driver Update

In 90% of the cases, the reason behind a Generic PnP monitor issue is an obsolete driver. So, try updating the Generic PnP monitor driver to resolve the issue at the earliest.

• To begin, navigate to Start and open Device Manager
• Once you are inside the Device Manager window, you will have to click on the option saying, Monitor
• Here, a menu will appear where you will be able to find an option saying Generic PnP monitor
• Upon finding the option, right-click on it and select Update Driver Generic PnP monitor
• Now, you’ll find a dialogue box. You’ll have to choose the option that says Search automatically for updated driver software
• Finally, you’ll see the available updates. Download and install that using the on-screen instructions

When the installation is complete, you’ll have to restart the PC and check for the error. Hopefully, this fix will work. If not, then try the next one.

Method 3: Update Display Card Driver

Sometimes, the responsible driver behind the Generic PnP monitor issue can be the Display Card Driver. So, make sure to update that using the following steps.

• Start by opening Device Manager following the same steps as the previous fix
• Then, click on Display Adapters to continue
• There, you’ll find an option saying Graphics Card, right-click on it
• Select the option saying Update Driver Graphics Display Card and when the dialogue box appears go for Search automatically from the internet
• When you find the latest update, download and install it on your PC using the on-screen guide

When the update is over, you need to restart your PC for the changes to take place. Now, check if the Generic PnP monitor error is gone or not.

Method 4: Run the System File Checker

Windows 10 comes with some in-built troubleshooting privileges. And, to combat a persistent issue like a Generic PnP monitor, you can make use of that.

• To begin, open the Command Prompt window from the Start menu
• Then, right-click on it and go for the option that says Run as Administrator. This will help you access the Command Prompt with administrative privileges.
• Now, you will have to type sfc / scannow

The scan could take 15 – 30 minutes. Do not lose patience and wait for it to complete. When the scan completes, restart the PC and check for the error.

Method 5: Reinstall the Monitor Driver

If none of the above 4 fixes help with the troubleshooting, you can try to reinstall the Generic PnP monitor driver.

• Open the Device Manager window from the Start option
• Then, you will have to click on the Monitor option from the available choices
• After that, locate the Generic PnP Monitor and right-click on it
• Finally, click on the Uninstall option. Now, a confirmation option will appear. Confirm the deletion.
• Once you are done, restart your PC
• When the PC starts, you will find some options on the screen. From there, select Scan for Hardware Changes
• As the Operating System detects the Monitor driver, allow it to complete the installation

Now, check if the issue is there any more or gone for good. This fix should resolve the Generic PnP Monitor issue. If this one fails as well, there is one last thing you can try.

Method 6: Update the OS

If none of the methods work out, then you can try to update the Windows version as a last resort. To do so, you will have to go to Settings and then click on Check for Available Updates.

If you find any pending updates, then click on Download and Install. Once the installation is complete, restart the PC and hopefully this time you won’t have to see the Generic PnP Monitor issue.

Wrapping Up

We wish that you will be able to get rid of the Generic PnP Monitor issue quickly. Let us know which fix helped you this time. And, if you have any other tricks or tips for everyone, feel free to share them with us in the comments section.

Also Visit: What is ERR_CACHE_MISS and 7 Easy Fixes for It

Also Visit: Resolve “0 Available Plugged in Charging”: 3 Quick Fixes